Valuable Equipments Sole Cleaning Machine For Dust And Mud Free
Working life: 7 years at least.
1. The machine is ultra-thin , the height of the cleaning area is
only 2CM .
2. There is no water splashing and 100% comprehensive cleaning
during the machine working . People do not need to stay during the
cleaning , and machine will stop when people leave .
3. The whole machine is fully intelligent with water , automatic
water change , automatic drainage , and washing along with draining
4. When the machine is in standby and running , the height position
of the water level is monitored in real time to ensure the safe use
of the machine .
5. A wireless network is installed in the machine and our company
will supervise the operation of the machine in real time . (Network
model of WIFI/4G option)
6. Disinfectant is automatically added in the suction area , for
the environment to be sterilized . (Option)
1. The machine can start and clean automatically when nobody use
2. The machine is equipped with an ambient temperature sensor to
ensure that the machine works properly.
3. The machine can wireless communicate with mobile devices (mobile
phones, etc.), and connect the machine through the wireless device
to set various parameters . (network version WIFI/single version
4. It is very convenient to replace the brush without on the
machine disassembly the sole cleaning machine.
5. Automatic induction control. When the personnel are close, the
equipment automatically starts working and leaves the automatic
stop work, which can effectively save energy, reduce mechanical
loss, prolong service life, eliminate the need for special care,
and reduce management costs.
6. The new generation HARDWOKR® sole cleaning machine comes
standard with exclusive quality power supply. It adopts 24V human
body safety contact low voltage, several sensors built in the body,
multiple safety protection to prevent overflow and leakage. In the
process of using, the user's safety is fully considered, and the
user's worries are better solved.
1. Are you a factory or a trader? Where is the factory?
A : We are a production-oriented company located in Kecheng Road,
Jiulongpo District, Chongqing. Welcome to visit the site.
2. Shipping and transportation time
A : Shipping fee, air freight, international courier fee,
transportation time can be based on the customer's specific
country. From the outbound to the transportation, we will track the
whole process and view it in real time. We will deliver the best
service with the fastest speed.
3. Is the sole cleaning machine difficult to install?
A : It is not difficult. It is necessary to ensure that the ground
level is not low. After receiving the goods, place them according
to the instructions of the import and export of the products.
Connect the power supply according to the instructions.
4. To what extent can the sole cleaning machine be cleaned?
A : The degree of cleaning by the sole cleaning machine can be done
with a hard work under the degree of dirty soles. After cleaning
the soles, you can walk on the white paper without any traces.
5. Is the color optional or can I customize the color?
A : The default is black, other colors can also be customized.
6. After-sales, distribution channels, is there a store
A : Our products are strictly controlled from order to delivery.
Jiebang's maintenance service outlets are spread all over the
country, covering multiple cities and having 1000+ service outlets
to ensure professional after-sales service.
Channel-type stepping sole cleaning machine developed and produced
by Jiebang Electric . The body is made of stainless steel 304
plate.The appearance is beautiful and durable, and the whole
equipment needs 24V power supply when it runs.
Sole cleaning machine consists of two areas: the scrubbing area and
the drying area.Scrubbing area: During the walking process, the
washing machine repeatedly runs on the dust of the sole to wash,
dissolve, rub and clean the dust.Ultimately, the effect of
thoroughly removing the dust from the sole is achieved.Drying area:
There is a special material absorbent cotton that can absorb the
residual moisture in the sole within 1.0 seconds, and the whole
process can be completed in 15 seconds.
Combined with the traditional stepping machine, the thickness of
the cleaning area is reduced to 2CM while the original appearance
of the body is increased, which saves the running space of the
washing machine and the body length is diversified.
The sole cleaning machine has a new generation of intelligent
control technology. When the machine is running and the machine is
faulty, the employee will be reported to the after-sales staff for
the first time. When no one passes, the device will automatically
enter the stationary state without waste of resources.
|Power supply||AC220/110V(option) 50/60HZ (standard 24V dedicated power supply)|
|Width indicator lamps||LED blue light (default), violet light (with UV disinfection
function , optional)|
|Drainage method||Direct drainage|
|Material||Aluminum alloy , plastic , 304 stainless steel|
|Panel color||Default black, other colors can be customized|
|Pipeline interface location||Optional left and right|
|Size:||Width:76cm , height: 8.5cm on both sides , cleaning area height:
2cm , water absorption area length: 57.6cm , cleaning length can be
1. When a person pass through the machine , the brush rotates, and
the adjacent two brushes rotate in opposite directions ; The foot
is stepped on the brush pedal to achieve the purpose of cleaning
the sole . Automatically changing water and automatically
discharging dirt .
2. The cleaned shoes can be sucked dry when they are placed on a
high-performance absorbent sponge.
Conditions of Use
1. Ambient temperature: 0-40°C .
2. Supply water temperature: 0-30°C .
3. Water pressure :2-6KG/CM² .
4. The floor must be horizontal and sturdy when installed, besides ,there is no pit ,no tilt .The bottom of the machine must be completely in contact with the ground , no gap.
5. It is strictly forbidden to move and lift the machine before
draining the water inside the cleaning machine.
6. When in installation, the whole machine should be balanced force
during the lifting, and no press can be applied to the surface of
the machine during the lifting.
Packing: wood case
Contact person: Helen Won
Email: email@example.com / firstname.lastname@example.org