Intelligent Clean Room Shoe Sole Cleaning Machine Automatic Sole
Working life: 7 years at least.
The width indicator lamps between the two sides of the sole
cleaning machine blinking interval quickly:
① Blink once every 3 seconds, when sensing area is blocked.
② Blink twice every 3 seconds when add water timeout (such as
stopped water ).
③ Blink three times every 3 seconds when drainage timeout (manually
adding water causes the water level to be too high).
④ The water level sensor is faulty. It flashes four times at
intervals of 3 seconds.
⑤ The motor is faulty. It flashes five times at intervals of 3
⑥ The ambient temperature does not meet the requirements for use.
It flashes six times at intervals of 3 seconds.
⑦ The machine is not registered, and it flashes seven times at
intervals of 3 seconds.
1. Apply to hotels, electronics, food, cosmetics, aerospace,
bio-pharmaceuticals and other places.
2. Sole cleaning machine installation environment: Air shower,
factory aisle, operating room, laboratory, hotel room, etc..
3. Sole cleaning machine is designed with intelligent control,
induction start, machine will stop immediately when people leave,
in order to achieve the purpose of extending life and saving
4. The machine is designed with a dedicated power supply and 24V
safe voltage, will not do any harm to people.
5. The machine is ultra-thin, the height of the cleaning area is
6. There is no water splashing and 100% comprehensive cleaning
during the machine working. People do not need to stay during the
cleaning, and machine will stop when people leave.
7. The whole machine is fully intelligent with water, automatic
water change, automatic drainage, and washing along with draining.
8. When the machine is in standby and running, the height position
of the water level is monitored in real time to ensure the safe use
of the machine.
|Power supply||AC220/110V(option) 50/60HZ (standard 24V dedicated power supply)|
|Width indicator lamps||LED blue light (default), violet light (with UV disinfection
function , optional)|
|Drainage method||Direct drainage|
|Material||Aluminum alloy , plastic , 304 stainless steel|
|Panel color||Default black, other colors can be customized|
|Pipeline interface location||Optional left and right|
|Size:||Width:76cm , height: 8.5cm on both sides , cleaning area height:
2cm , water absorption area length: 57.6cm , cleaning length can be
Conditions of Use
1. Ambient temperature: 0-40°C .
2. Supply water temperature: 0-30°C .
3. Water pressure :2-6KG/CM² .
4. The floor must be horizontal and sturdy when installed, besides ,there is no pit ,no tilt .The bottom of the machine must be completely in contact with the ground , no gap.
5. It is strictly forbidden to move and lift the machine before
draining the water inside the cleaning machine.
6. When in installation, the whole machine should be balanced force
during the lifting, and no press can be applied to the surface of
the machine during the lifting.
Packing: wood case
Contact person: Helen Won
Email: email@example.com / firstname.lastname@example.org